• IPC with 650M 5axes controller with 15” LCD
• ISO 9001 quality assurance
• 5HP Spindle Motor,HSK-50 Spindle Taper
• 100-6,000 rpm Grinding spindle speed
• Heavy duty linear slide way to ensure toughest cutting and smoothly operating without vibration
• C3 precision ball screws hardened & ground for high accuracy and long lasting
• FC30 Meehanite  Casting main frame with annealed & stress relieved for long term reliability
• 100% Laser tested for positioning accuracy & repeatability
• Standard way cover on three axes
• Tool box & Tools
• Coolant System
• Central lubrication system
• Built-in Quartz work light
• Portable Hand Wheel  

Specification :
 

Grinding Range Max. tool length	250mm
Max. chuck dia	32mm
Max. tool dia	32mm
Spindle & Motor  Grinding spindle speed Frequency drive	100~6000rpm
Grinding spindle motor	3HP(2.25Kw) 5HP(3.75Kw)Optional
Spindle diameter	100mm
Work head Spindle taper	HSK-50
Clamping system	6kg/cm²(80psi)
Min. work head graduation	0.001º
Axes Travel z X Axis. Linear motion	200mm
Y Axis. Linear motion	110mm
Z Axis. Linear motion	140mm
C Axis. Linear motion	360º
A Axis. Linear motion	-10º~180º
Feed rate of X/Y/Z axis	1-6,000mm/min
Servo motor X Axis. servo motor	1HP
Y Axis. servo motor	1HP
Z Axis. servo motor	1HP
C Axis. servo motor	1HP
A Axis. servo motor	1HP
coolant motor	3Hp & 2Hp
Lubrication pump	1/8 Hp
Controller Model	IPC with 650M
Number of Control axes	5 Axis (X.Y.Z.C.A)
Floor space	3,300x1600mm
Weight	3,500Kgs

STANDARD ACCESSORIES:
 

Tools & box	Software for Conversational programming as note 1
Full enclosure	Cooler unit for oil coolant system
Leveling bolts & plate	Grinding wheel flange *5 sets
USB 2.0  15”color LCD	Pressure dust container with filter
RS-232 Interface	Plug gauge for measurement machine reference points
Auto lube system	3-Dimesion model simulation system
Halogen work light	Pneumatic collet holder with VMK – 20 Collets for ψ20 mm
Operation manual	Angular setting disc for machine reference points
Oil Coolant system	Pneumatic collet holder with VMK– 16 Collets for ψ12, ψ16 mm
Oil & Mist separators	Pneumatic collet holder with VMK- 8 for ψ6, ψ8, ψ10 mm

Note 1: endmill, ball endmill, radius endmill, tape endmill, tape ball endmill 

Additional Accessories information:
 

Power requirement	15 KVA 3 phase 208V/230Vmax
Air requirement	90 - 100 psi
Type of oil for Way oil/ oil chiller / pneumatic oil	Mobil Vactra #2 / Shell Tellus 32 / Air tool oil
Coolant capacity	60 Gallons